Arduino Uno DC Motor Control for Automatic Roller Blind (Proteus 8 Simulation)
Roller Blind is a type of window covering. These are a usually stiffened polyester, mounted on a metal pole and operated with a side chain or spring mechanism. Lower cost and ready made blinds often come with a PVC pole. These days, roller blinds have been modified with a motor, so with the motorized roller blind, the side chain is not needed for opening or closing the blind, motor will rotate clockwise when opening the blind, and counter clockwise when closing the blind. But, most of motorized roller blind are semi automatic. We still have to control with remote control. So, this article will explain how to design a automatic roller blind.
Automatic roller blind can be light dependent , so the blind will be open or close if there is sunlight or there isn’t sunlight. Another method is with a scheduling, so we will set what time the blind is opened and what time the blind is closed. Because in this article, we will make a simulation so, the automatic roller blind that will be designed is a scheduling one
Automatic roller blind can be light dependent , so the blind will be open or close if there is sunlight or there isn’t sunlight. Another method is with a scheduling, so we will set what time the blind is opened and what time the blind is closed. Because in this article, we will make a simulation so, the automatic roller blind that will be designed is a scheduling one
Roller Blind
Mechanism of Roller Blind
In this project, we will learn how to drive DC motor using microcontroller and learn to generate clock from microcontroller. The clock will be used for scheduling the automatic blind. The clock will be displayed at 16x2 LCD display.
For Completed Explanation abaut this project and the simulation Click Here
